Category Archives: News

New RauschUSA HQ

RauschUSA New HQ – 1686 Opportunity Ave.

RauschUSA’s new headquarters is now located at 1686 Opportunity Avenue in Chambersburg, PA 17201. We have completed our move, and all departments have resumed normal operations.

Our team is excited for the future our new building has prepared us for, with a single unified building and greatly expanded square footage for continued growth.

We look forward to hosting our (delayed) annual Customer Appreciation Day in the spring of 2018, and will welcome our vendors, customers, and dealers to see our new facility. And of course you are welcome to stop by for a tour if you are in the area!

PS – We are now the unofficial sponsors of the green at hole #1 at Rocky Springs Golf Course.

We’re Moving!

RauschUSA is moving to a new location on November 1st, 2017. We’re not going far – just up the hill.

Our entire office will be available in a limited capacity from November 1st through the 3rd as we physically move our inventory, integration, service, and administration facility from one location to the other. The phones will not be operational on the morning of November 1st. Please place all repair, parts, and supply orders this week to minimize the effect of our move on your business.

Please update your shipping and billing records with our new address immediately.

Rausch Electronics USA, LLC
1686 Opportunity Ave.
Chambersburg, PA 17201

Thank you for your continued support of RauschUSA!

WEFTEC 2017 in Chicago: October 2nd

RauschUSA is excited to announce our return to the 2017 WEFTEC Expo in Chicago, IL this fall from October 2nd-4th. We are in booth 6115 near the registration entrance of the McCormick Place Convention Center.

From WEF:

“WEFTEC® is recognized as the world’s largest annual water quality technical conference and exhibition, providing extensive educational opportunities and unparalleled access to the field’s most cutting-edge technologies and services.”

WEFTEC 2016 was a highly successful show for RauschUSA, and we look forward to the opportunities at the Chicago leg of this international event. Our experienced sales staff are attending the show with a Rausch demo system.

Water Expo 2017 in Miami: August 30

RauschUSA is excited to announce that we are attending the 2017 Water Expo in Miami, FL on August 30th and 31st. The event is in the MACC Convention Center, near the Miami International Airport. Rausch is a proud Silver Sponsor, and are located in Booth 717 of the expo hall.

The Water Expo is a growing industry trade show targeting the Latin American & Caribbean markets and the USA at the same time.

From the Water Expo Website:

“Presenting Equipment, Technologies, Products & Know-How for the Wastewater, Water Quality, Environmental Services and Sanitation industries.

Where you CONNECT with Latin American & Caribbean huge markets and major infrastructure projects in the USA at the same time.

The effective commercial hub between North American Manufacturers & Distributors with Buyers, Professionals, Dealers, Operators, Contractors and Potential Reps. from 40+ countries, including the USA!”

Featured System Builds: Clean Water and Solar Power

This spring, RauschUSA collaborated with Clean Water Services of Hillsboro, OR to design and build an environmentally friendly Rausch Pipe Inspection System, which can run a full day off of batteries charged with solar power. Moreover, this system offers the benefit of silent operation in quiet neighborhoods, because the system runs without idling or a generator.

Clean Water first approached RauschUSA in 2016 with the special request to build a solar-power inspection van. After much research, engineering planning, and back-and-forth conversation, we agreed upon the design and setup for the custom Ford Transit, and Clean Water sent us their trademark navy blue van to start the build.

The solar power is not the only unique and custom feature of this special pipe inspection truck: Clean Water requested a 1/2 bath with a sink, a toilet, and a black water tank.

In order to have room for the bathroom, however, the desk layout needed to be unique – so Clean Water asked us to install a custom power-seat in the driver’s chair with remote-control operation. We worked with a local installer to mount and install the rotating chair. This seat is designed for improved accessibility for handicapped drivers and operators.

The solar power panels were installed by our integration team onto the roof of the Transit using a custom roof rack. A battery bank is built into the studio room on the passenger side, with a switch to swap to our standard inverter power. In our internal testing, the RCA Proline and Elka system could run a full day on the solar-charged batteries without turning on the Ford motor once.

We are very proud of the work our team has done to build our first-ever environmentally friendly solar vehicle! Clean Water Services and our dealer General Equipment have a long relationship with Rausch USA, and we are thankful that they approached us with this unique build request to send them an advanced Proline pipe inspection system.

Happy 4th of July!

RauschUSA wishes all of our customers and partners a happy 4th of July!

Our facilities will be closed tomorrow in honor of the national holiday.

Introducing Faris Machinery of Colorado

Rausch Electronics USA, LLC is proud to introduce Faris Machinery Company of Commerce City, CO as a welcome addition to our family of authorized distributors. Faris Machinery brings six decades of experience and expertise to the Colorado region, and works closely with their customers in the government and private sectors. Their team of trained mechanics, qualified field services technicians, and expert employees has made them a leader in their communities. They will be providing Rausch Electronics equipment sales, service, and parts to customers throughout Colorado. Faris Machinery is a committed distributor, providing contractors and municipalities the opportunity to experience all the advantages of owning and operating advanced Rausch inspection systems and technology.

Rausch USA Vice President of Sales Adam Baker shares “The partnership with Faris Machinery opens up a brand-new market for Rausch in Colorado, and we are confident that the team at Faris is committed to promoting Rausch’s quality inspection equipment. Their commitment to quality, service, and relationships matches our company’s values, and we are eager to coordinate with their sales and service teams. This is an exciting opportunity for Faris and Rausch moving forward!”

www.farismachinery.com