Category Archives: QuickLock Info

QuickLock Meets ASTM F3110-14 Standard

The QuickLock Mechanical Point Repair system has been certified to meet the new ASTM F3110-14 Standard. The specifications for the active standard documentation can be purchased from the ASTM.org website: ASTM Standard F3110-14

From the ASTM webpage:

Significance and Use

4.1 This practice is for use by design engineers, specifiers, regulatory agencies, owners, installers, and inspection organizations who are involved in the rehabilitation of pipes through the use of a Mechanical Trenchless Point Repair Sleeve with a Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints within a damaged existing pipe.

Scope

1.1 This practice establishes minimum requirements for good practices for the materials and installation of mechanical trenchless repair sleeve with a locking gear mechanism for pipes of varying inner diameter and offset joints in the range of 6 to 72 in. (150 to 1800 mm).

For more information on our trenchless point repair system, QuickLock, please visit www.repipetech.com/quicklock. Data sheets, manuals, installation videos and more information are available.QuickLock

QuickLock is NSF61 Certified for Potable Water

QuickLock, our trenchless pipe point repair system, has received NSF/ANSI Standard 61 certification for use in potable water from NSF International. See the certificate at NSF.org – click here.

NSF/ANSI Standard 61

“If you manufacture, sell or distribute water treatment or distribution products in North America, your products are required to comply with NSF/ANSI Standard 61: Drinking Water System Components – Health Effects by most governmental agencies that regulate drinking water supplies. Developed by a team of scientists, industry experts and key industry stakeholders, NSF/ANSI 61 sets health effects criteria for many water system component.”

www.nsf.org

QuickLock Point Repair

QuickLock is a permanent pipeline rehabilitation installation that features a 316L stainless steel sleeve encased in an EPDM rubber sleeve that is mechanically compressed against the inner pipe wall and is permanently locked in place by two (2) locking gear mechanisms. No chemicals or resins are used in this system, so there is no cure time.

www.repipetech.com/quicklock